[APP] - version 3.7.x (16. 3. 2015)

Started by Menion, March 09, 2015, 18:00:42

0 Members and 4 Guests are viewing this topic.

gynta

Quote from: menion on April 03, 2015, 22:58:34
About FC: hmm in log is
04-03 20:31:21.242 F/libc    (14296): @@@ ABORTING: INVALID HEAP ADDRESS IN dlfree
04-03 20:31:21.242 F/libc    (14296): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1)
Seems to be some issue in Android native library. This never happen before? Did you do any system update of your device?
Maybe - but I'm able to simulate this FC/restart on all my 3 devices (see profile).
If you can't help - no problem for me. I only have to be careful with quick tapping :)

Christian

Quote from: menion on April 03, 2015, 22:58:34
commands - attach me please an exported GPX so I may test it, thanks.
....gpx attached.
Next time i will try to create a log before starting next test run.
  •  

ta-ka

Quote from: menion on April 03, 2015, 22:58:34
@ta-ka: are you really interested in seconds when you are in time, more then hour since start? Because here it is not an issue, but intent.

I somehow foresee that this is an intent. ;) My case is middle-range running more than one hour and I want to know time with seconds at every 1.0 km even after 10 km or so. The explanation in my previous post was so bad. sorry.

In any case, please note that no voice at every '0 minutes' is the issue as same as already fixed '0 seconds' issue.
  •  

Andrew Heard

Quote from: gynta on April 03, 2015, 23:40:10
How about a separate forum group for Navigate, Guiding, Routing, TTS, Voice,... aso ?
And in the longer term the online manual could do with a lot more information in this area too, maybe some doco+video in tutorial style in additional to the existing reference manual style. Several terms like coursepoints, waypoints are often discussed here but never fully described that I can find. Then there are the "invisible" points along a track that BRouter creates, what are these called?
LM4.26.0 GOLD user ID:c7d47597a
  •  

balloni55

Quoteone thing i am missing, at the end of the track there is no notification
QuoteSo I hope, problem solved :).
unfortunately not :-[
Locus Map 4.26.0 Gold AFA

LM4 User ID e06d572d4
  •  

Christian

Confirm: no notification at the end except beep from "away from track"
  •  

Menion

Because it is just a two days since previous beta and changes are mainly because of your feedback, I'll rarely publish version over here on forum.

https://drive.google.com/file/d/0B_Nr4CT8osmtQkpmQ2hzNERJSEk/view?usp=sharing

Hope, it will be again a little bit better then version before.

And please mainly 0709 and others who care about navigation/guidance system. Choose ideally one existing topic and continue in discussion about this there. Because I sometimes have really troubles to grab all required information or answer/fix all reported issues. That's why I like help desk, because it is easy to report and check progress of one single topic ...
- Official help (ideas, questions, problems): help.locusmap.eu
- Advanced topics, sharing of knowledges: you're here!
- LM 4 Beta download, LM 4 Release download
  •  

michaelbechtold

Good start, Menion. Now use this momentum to add the edit option to tracks, too, and the Navigate From ... :-)
  •  

gynta

#113
About Trainigsmanager

thats for live tracking - you use it twice




better "TTS Setting" because "Settings of sound" has different meaning on crowdin



from...

Icon pack should be...

not...




"T:" means?


Andrew Heard

Quote from: 0709 on April 04, 2015, 08:43:13
Andrew. No manual, no specialised group ( a moderator ?). In non technical words so mine:
Courses(tracks) and Coursepoints(waypoints) belong to .tcx files. Garmin system and terminology (edit)
Thanks 0709. There is a manual discussing points, tracks - http://docs.locusmap.eu/doku.php?id=manual:data:data_basics. Does it just need improvement? I assume Locus staff are the moderators? Good doco hopefully means less questions, less support, happy knowledgeable users, more sales.
LM4.26.0 GOLD user ID:c7d47597a
  •  

Bucky Kid

#115
Hello, in new beta, when entering point insert / edit mode, the map zoom resets to 100%. I find this uncomfortable. Can the current zoom stay preserved  (choose the behaviout via config.cfg ?)

- conversion to navigation waypoint works good but I notice once I place at least one own navigation instruction, on the other hand I lose all other auto-generated instructions. Can auto-commands still be preserved? On imported track from gpx I still have autocommands.

- once I add my navigation waypoint the navigation trail disappears up to that waypoint when entering navigation mode. I think this is bug. This doesn't happen with track imported from gpx.
  •  

Menion

Thanks guys for a quick tests!

@michaelbechtold: similar as with points, I'm not convinced about need of "edit" button for tracks, and it's even worst with "Navigate from", sorry

@gynta: hmm, description fixed, "TTS settings" set, icons changed (agree), "T:" means text I not yet added to translation and in this case I forget to change it for already translated "Add variable". Thanks, fixed

@Andrew Heard: new manual is in very active preparation. We started from scratch since January and currently most of English part is done. Currently we do some UI improvements (images, layout) and I really hope that will end of April, Michal (guy who write it) will be done with core of English part and we will publish it ...

@Bucky kid: My point here was that as least I, personally ofter tap to edit/insert in cases, zoom is really far a way and I then have to zoom a lot to see editing points clearly. So I'll try not to zoom, when you are already +- zoomed.

- If you use "Create copy and generate  commands", completely new set of navigation waypoints is created. So there should be only a mess if all remain (old and new). That's why old are removed

- disapearing track, thanks, I'll try to simulate and fix it ...
- Official help (ideas, questions, problems): help.locusmap.eu
- Advanced topics, sharing of knowledges: you're here!
- LM 4 Beta download, LM 4 Release download
  •  

balloni55

#117
#119 solved :)
with improved commands!
but on reversely guidance it is furthermore missing and all commands are 180° mirrored.

EDIT: creating a copy of track with commands and changed orientation it seams to be all ok, fieldtest will follow ;)
EDIT2: fieldtest with copied tracks work in both directions very well :)

naming of track after creating a copy is allways _copy
so after a while i do not remember what i have done :-[
my suggestion:
copy > _copy
copy + reverse orientation > _copy_rev
copy + reverse orientation + navigation commands > _copy_rev_nav
Locus Map 4.26.0 Gold AFA

LM4 User ID e06d572d4
  •  

Bucky Kid

#118
Quote from: menion on April 05, 2015, 07:36:03I'll try not to zoom, when you are already +- zoomed.
If you're zoomed ‹100% then resetting zoom is useful, but at zooms ›100% I think it should stay.

Quote from: menion on April 05, 2015, 07:36:03- If you use "Create copy and generate  commands", completely new set of navigation waypoints is created. So there should be only a mess if all remain (old and new). That's why old are removed
Thanks for explaining. The track was created without navigation instructions. I think that on track created in Locus with help of routing Locus keeps list of all tapped points for re-routing (rerouting still works on saved track). If I add own navigation icon on such track, this waypoint should be added to list of pass-through places so that Locus could continue auto-generating navigation commands along all the track (except the points where I add own commands)

Adding navigation waypoints to imported track doesn't have any effect - routing symbol not displayed neithet on track neithet in navigation panel.
  •  

balloni55

one minor issue
in TTS settings "the test phrase" is written in german language although language of locus is english and testtext is also spoken in english

Locus Map 4.26.0 Gold AFA

LM4 User ID e06d572d4
  •