Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - freischneider

#271
Quote from: CabrioTourer on April 02, 2023, 20:46:22@Menion
Small question. Where is the legend file for openandromaps Elevate is located? Is it a pdf?

I would like to replace it with an own one.
I want to create one which includes only the parts I'm interested in.
It is a PDF. Is in the themes folder at Elevate
#272
Die Garmin Karten werden nicht mehr verbessert. Es ist nicht einfach, da Garmin hier keine Unterstützung gibt. Die wollen das nicht.
Aber die Unterstützung ganz löschen sollte man auch nicht.
Einfach so lassen wie es ist.

Eine Abo Unterstützung bringt hier auch nichts. Die Karten verwenden nur noch sehr wenige. hier müsste sehr viel Zeit investiert werden und es nicht sicher ob sich was verbessert.

Aber ein Abo ist immer Willkommen. Denn die Funktionen müssen ständig am Laufen gehalten werden. Android macht ständig Änderungen. Im Locus Team arbeiten viele Personen und die wollen alle einen Lohn. Ich habe ein Gold Abo gemacht obwohl ich die Gold Funktionen gar nicht nutze. Aber so ist Geld da um weitere Verbesserungen voran zu treiben und Locus Map für die Zukunft Funktionsfähig zu halten.
#273
Navigationsbefehle beifügen muss genau dort bleiben wo sie sind. Die Zeiten sollten mit Befehle die gleichen sein wie ohne. Daher solltest du den Fehler im Helpdesk melden und dem ganzen hier ein Ende machen. Beispiele und GPX anhängen. und nur das nötigste Schreiben.
Das mit den Geschwindigkeiten selbst einstellen ist ein Verbesserungsvorschlag. Die gibt es auch im Helpdesk. Ich meine dafür gibt es bereits einen, habe ihn aber auf die Schnelle nicht gefunden.
Du schreibst damit Menion ein gutes Übersetzungsprogramm verwendet. Du kannst dieses genauso verwenden. Ich kann auch kein English am PC werden die EN Seiten automatisch auf DE angezeigt und zum Schreiben benutze ich https://www.deepl.com/translator
#274
Quote from: Die Batzen on March 31, 2023, 19:16:06Das lässt sich bei mir folgendermaßen reproduzieren:
  • Einen Punkt aus dem Punktemanager wählen (der nicht im aktuellen Bildausschnitt sichtbar ist)
  • Im Navigationsmenü Navigieren auswählen und Navigation starten
  • Nun ist der POI-Anzeiger sichtbar, obwohl keine Punktdetail aktiv ist
Bei mir wird da nichts angezeigt. Ich wähle einen Punkt aus der Datenbank. Dieser ist weit entfernt. Gehe unten links auf navigieren. Start berechnen. Es wird kein Anzeiger angezeigt.
#275
Ganz normal ist das nicht bei dir. Normal ist der Poi aktiviert und man sieht unten den zu einem drittel geöffneten POI. Siehe in diesem Video.
Bei dir ist aber kein POI geöffnet. Ist das Problem noch ?

https://forum.locusmap.eu/index.php?topic=8330.msg70708#msg70708
#276
Das ist ein POI Anzeiger. Du hast einen POI aktiviert und dann die Karte verschoben. Er zeigt dir an in welche Richtung dieser ist.
Einfach POI wieder deaktivieren.
#277
LM3 arbeitet nicht mit LoRouter sondern mit BRouter. Bei LM3 Zeiten die nicht stimmen am besten an BRouter wenden.
#278
Bitte hänge beiden Routen als gpx hier an.
#279
Wenn du ein Backup hast würde ich sie mal kpl. neu installieren
#280
You can find the logcat here.
https://forum.locusmap.eu/index.php?topic=8047.0
Unfortunately I can't use it with Android 13 anymore. The current one follows. Will post it there as well.
#281
I haven't quite reached my goal yet, but I've come a lot closer. With the Logcat, I had only one defined trigger. Then when the announcement comes. And it comes only once 15s before.
With the current setting, I now have to work longer in practice.
I have also found out so that it also goes without tick. I have tick and Locus App active replaced by notification query. Notification from Locus with the title Navigation.
In any case, I have learned a lot again.
A big thank you for that !
#282
From me also once again a thank you
Have now been doing various tests all day and testing other combinations of If and Endif and variables. Once it was not zoomed at all and mostly only in and not out. I just thought of something else and I think that will work. Will be tested tomorrow.
The Unix seconds are not used with Navipoint1_Time. I have found out through various tests that it is specified in miliseconds. Unfortunately I found this out only after many unsuccessful tests.
I have to take a closer look at the tick later.

The examples for inspiration are all grayed out. Are they inactive ? How do you do that ?
#283
Früher hatte ich meine Legende als PDF abgespeichert und über Favoriten geöffnet. Da bist du dann nicht an ein Theme gebunden. Dann wurde die Legende in den Themes auswählbar und ich habe die Funktion aufgegeben. Wobei die Lösung ein klick schneller ist als über Theme
#284
Distance to Navipoint I wanted but the problem is the distance. Depending on the speed is very different.
That's why I try to use Time now. Zoom in 15s before Navipoint.
I just do not know where I apply the tick. If I apply it alone in the profile it goes day and night. Can I say in the profile notification Locus / navigation + tick ?
I also don't know if the value is displayed in s or min. or maybe 22:08.
The variable is deleted immediately after the task. Therefore I cannot see its value.
At the moment I am ready, only tick is missing for the test.
https://taskernet.com/shares/?user=AS35m8myXKtjIGNUWsV%2B9rrY700mXg7J6ZfEVVnMRuKgnB7lCQSX4FKkJo5qdMP9dVIWhJcG9G%2BstQ%3D%3D&id=Project%3AZoomTime

Dynamic ticks: yes I am also interested. But for now it has to run like this. And then we have to switch to the German forum.

Translated with www.DeepL.com/Translator (free version)
#285
Thanks Tapio
Ah I see, the value I store in the variable is only the one at that time of retrieval. It does not adjust itself. This is how I have used it since. I retrieved the zoom factor and saved it. Then zoomed in and after 10s zoomed back to the saved value.
I have since used Logcat Entry as the trigger. But on Android 13 there is no access to logs anymore.

I then tried to use the distance from the notification. I have attached the profile below: Zoom Distance

As trigger I took the notification Locus Map with the title Navigation. The zoom worked. Only zoom back to old value did not work. But I don't know why.
But distance is not ideal. If I drive very slowly, the zoom comes too early. If I drive very fast it comes too late.

That's why I want to look at Navipoint1 Time. I would like to zoom to level 20 15s before reaching the turn.
But if I use the trigger Notification Locus Map with the title Navigation, the value is only saved once at the very beginning. I would like to have it up to date during the whole navigation.
Otherwise I would use the same profile. Smaller 15s zoom and larger 20s back to the old value.
I made %ZoomTaskRun so that if I make 2 turns in quick succession, the zoom stays and doesn't go in and out all the time.

But if the value of time does not adjust then I can forget it.

https://taskernet.com/shares/?user=AS35m8myXKtjIGNUWsV%2B9rrY700mXg7J6ZfEVVnMRuKgnB7lCQSX4FKkJo5qdMP9dVIWhJcG9G%2BstQ%3D%3D&id=Project%3AZoomDistanz

Profil: Distanz
Ereignis: Benachrichtigung [ Besitz Applikation:Locus Map Titel:Navigation Text:* Subtext:* Messages:* Other Text:* Typ:* New Only:Aus ]



Eingang Aufgabe: Anon

A1: Variable Aufteilen [
Name: %evtprm3
Teiler: , ]

A2: Variable Suchen Ersetzen [
Variable: %evtprm32
Suche: m
Übereinstimmungen Ersetzen: An ]

A3: If [ %evtprm32 < 70 & %ZoomTaskRun !~ 1 ]

A4: Request sensors and stats [
Konfiguration: map_zoom_level
Timeout (Sekunden): 10 ]

A5: Execute Action Task [
Konfiguration: tasks: {"map_zoom":{"action":"value","value":"20"}}
Timeout (Sekunden): 0 ]

A6: Variable Setzen [
Name: %ZoomTaskRun
Zu: 1
Max Rounding Digits: 3
Structure Output (JSON, etc): An ]

A7: End If

A8: If [ %evtprm32 > 80 & %ZoomTaskRun ~ 1 ]

A9: Execute Action Task [
Konfiguration: tasks: {"map_zoom":{"action":"value","value":"%map_zoom_level"}}
Timeout (Sekunden): 0 ]

A10: Variable Lösche [
Name: %ZoomTaskRun ]

A11: End If