Messages

Thanks  , with new beta it is working much more better.
But ...

After recalculating Locus leads me back sometimes just 'a little bit' (without a via point).
Sc1: starting point
Sc2: overview
Sc3: this is what I would see (and hear) on my bike (with zoom according to speed)

Because automatic recalculation is trigger max. once per 30 seconds, ...

Knowing about this 30 secs I started a new test series ... and yes, with enough patience  this is what Locus does.
But there is a second condition: recalculation only starts if you are moving.

Therefore switching programs seems to start navigation in my earlier tests ... but now I know it were the gone 30 sec and movement when I came back.

But I'm really not sure if there should be a 30sec delay ...

What is the reason for this?
Isn't the distance a better criteria?

The first recalculation is influenced by settings but all other seems to be random.
Sometimes after 300m, sometimes 600m etc.

Same to me ... but when you leave Locus and switch back: recalculation starts (most times  )immediately.

Because a lot of geocaching functions are implemented directly in Locus and for me it isn't complete clear what's in Locus/addon  ... what functions are only in this addon available?
Means ... what wouldn't work if the addon isn't adapted?

... 12.00h makes no sense for me too.

After some more tests (and the help from 0709  ) I found a setting that comes near to my desired behaviour.
I choose "no autorecalculation" ... use some via points (to protect the planned route) ... set manual recalculation to route priority ... increased the size of guidance line (with distance shown) ...
and result is:

As you see from my posts ....

Navigating is really confusing because of many different options with different effects.
At home it's possible to test ... and switch ... and restart .. and switch  ... and test

But last week I did a biking tour with my friends and (almost) every second parking place we stopped and  I needed to justify the route. 

When I then follow the route and stop navigation ... and want to  proceed the route (without having passed
the via point) Locus leads me back to the Via point.
I found no way to proceed my navigation to the end point ...


After some attempts ... I changed my setting to "route priority" ... and now Locus navigates from my position in end direction (without the skipped via point).

Interesting ... 

when I activated my screen an tablet (after writing the last post) Locus immediately starts recalculation.

This behaviour can be repeated. I just have to wait until my screen is turned off ... when I activate the screen -> Locus recalculates the route from my GPS point. 

Another try with via Points:

The first time I leave the route LM recalculates and shows the new route from my GPS point.
When I then left the route for a next time on a different point ... then I can see a blue cursor on the navigation route and my actual position (+) with no connection to the route.
It seems as if recalculation and drawing the route new from actual position only works one time.

Second try with "Via Points":
I create a via point and started with "point priority".
When I now leave the route Locus points to the first Via Point ... Screen 1

... but the navigation route doesn't start from my GPS position. It just shows the route where I should be.
My active cursor (with my position) stands alone beside the route.

Hi,
my aim is to create a route (with many deviations) for biking which starts and ends at one point.
I want to navigate along the complete route and when I miss the route Locus should lead me back to the next point of the route.

I now tried ( in the test mode with GPS off  ) several settings ... but no one leads to the desired result.
Version: latest beta 3.37.2.9
Settings:
- Route re-calculation:
   + route priority (with distance 80 m)
- advanced
   + Strict route following on
       - what ever difference this should effect, because I always want to go back to my route when navigation a route
   + max. allowed deviation
      - I set this to 10000 because I don't know what this switching from navigation to guidance should effect

First I created a route with many "minor" streets with shaping points (Screen 1: red=desired;purple="normal" route)

When I start to navigate and leave the route for some meters Locus calculates the complete route new (Screen 2)

Quelle www ...  :

Grundlagen der Navigation

Uhrzeit als Richtung
Ähnlich der Kursangabe in Gradzahlen können auch Uhrzeiten verwendet werden.
Dabei ist 12 Uhr immer voraus, 6 Uhr immer hinter dem Flugzeug und 3 Uhr rechts und 9 Uhr links.

Piloten verwenden häufig diese Form der Richtungsangabe, um eine Sichtrichtung (Peilung) anzugeben.

New ALPHA version

Geocaching problems are solved ... 😎

@jonny.blue
hmm I see this error as well but call the same function for the second time, I get an offer to login. What function did you tried?

I tried to log a visit, log a TB, upload a note ... and can repeat this without a positive result.
Loading a PQ doesn't work either.