Messages

Weiß jemand, ob Locus pro im Grenzgebiet Deutschland/Österreich beim Überfahren der Grenze automatisch die Karte wechselt?

Locus wechselt von selbst keine Karten. Es kann aber einen Button "Schnell-Umschalt-Taste" einblenden wenn die Abdeckung der aktuellen Karte verlassen wird (Einstellungen->Allgemein->Kartenansicht->Schnell-Umschalt-Taste=Ausserhalb der Karte) wo bei Betätigung einige Karten als Alternative zur Aktuellen angeboten werden. Um das auszuprobieren brauchst Du Dich nicht durch den Schnee kämpfen, ich habe das gerade vom Sofa aus getestet.

Danke.
Die Schnell-Umschalttaste links oben erscheint bei mir nur, wenn ich in der Konfiguration "immer" eingestellt habe und nicht bei "außerhalb" .

Locus pro v2.02

Hallo,

also mit  - MOBAC 1.9 preview 13 add maps - am PC gehen noch alle Outdoor Active Maps    Auch die "SuperZoom" (16) Karte

lg.

Danke, ja , es geht wirklich (wieder).
Weiß jemand, ob Locus pro im Grenzgebiet Deutschland/Österreich beim Überfahren der Grenze automatisch die Karte wechselt?
Ich kann es z.Zt. wegen zu viel Schnee in den Bergen nicht testen.

Edit: Die Online-Karten von Outdoor Active unterscheiden sich doch ziemlich von denen mit MOBAC erstellten (z.B. sind die Beschriftungen von Orten (Ortsteilen) komplett verschieden, auch die höchsten Zoomstufen sind auf den Online-Karten besser, die bei MOBAC "seltsame" Zoomstufe 16 ist ganz normal).

Auch von mir vielen Dank an jusc.

Hat keiner zufällig eine fertige outdor active sqlitedb von Südost-Oberbayern (und event. das angrenzende Nordtirol)?
Oder kann ich das irgendwo herunterladen?
MOBAC geht leider nicht mehr:-(

https://market.android.com/details?id=com.mjk.locusmaptweak
schon oben?

Danke und schon geht es.

Wie bringe ich Outdoor aktiv in das Onlinekarten-Auswahlmenü von Locus

In den Settings/Maps/  ...ganz unten.

Zommlevels 8 bis 17

Da hatte ich natürlich zuerst geschaut, aber Outdoor aktiv fehlt leider bei den knapp 40 Onlinekarten.

Ich hatte gestern Locus Pro 2.0.1 neu installiert.

Also, wie gesagt, Detschland funktioniert, Österreich nicht...

Wie bringe ich Outdoor aktiv in das Onlinekarten-Auswahlmenü von Locus pro?
Und funktionieren alle Zoomstufen?

I don't know but when I close locus (with confirmation) and then immediately after that go to some task manager, locus after around a 5 sec disappear because is killed by system. How is then possible to take some CPU usage when process is killed?

Good morning,
with the new v2.0.1 all my problems with Locus have gone :-)

Thank you for your hard work yesterday.

But the problem still exists that the processor runs now at 10 % higher than with locus pro v.1.16.3 and even after stopping the v2.0.0.3 the processor load is 10 % higher as before. I have to reboot the phone to get a deeper load (with the 1.16.3 all is perfect).

what you mean "even after stopping"? When you close Locus by dialog (Yes close), then even after that you have 10% higher CPU usage then with closed 1.16.3? This is not possible because Locus close itself with unix 'kill' command so there will not be any background process or something like this.

Yes, exactly.
I saw this since the first v2.0.0.x,  on my phone I can reproduce this.

lloks like a conspiracy against new version


babi, gynta: zoom level of vector map or every map? So you end application with zoom let's say 12, and when you start locus again, there is different value?
tramp: are you sure? Seems you're leader of this conspiracy )

To the zoom level:
1. I start locus with a vector map and a track.
2. I change to a sqlitedb map: the zoom level seems to be the same.
3. I restart locus then (!! next problem below!!) and change now to the vector map again the zoom level is some steps smaller.


New problem after point 3: the sqlitedb map is loaded with a small zoom level, the track is shown in the same size as before, but I can shift the map independent from the track. After the next change to vector maps and back this behavior has gone. I could reproduce this several time. In v1.16.3 I did not see this.


Edit: I will stop testing today.

ufff, five hours of searching and testing ... looks like some issue on Android below 3.x (and even just some of them) ...

[attachment=0:1tsweaeo]2.0.0.3.apk[/attachment:1tsweaeo]

The 100% problem seems to be gone but this version does not load any sqlitedb- or vector maps :-(

I tried the v2.0.0.3 without GPS (in house) and without a loaded track so Locus does not show the correct position on the loeded map.
This is now ok for vector and sqlitedb maps :-)

But the problem still exists that the processor runs now at 10 % higher than with locus pro v.1.16.3 and even after stopping the v2.0.0.3 the processor load is 10 % higher as before. I have to reboot the phone to get a deeper load (with the 1.16.3 all is perfect).

ufff, five hours of searching and testing ... looks like some issue on Android below 3.x (and even just some of them) ...

[attachment=0:28epi4bh]2.0.0.3.apk[/attachment:28epi4bh]

The 100% problem seems to be gone but this version does not load any sqlitedb- or vector maps :-(

I too extracted v1.16.3 pro from an oldTitanium Backup and installed it over the v2.0.0 and all is working as before (no problems with sqlitedb- and vector-maps).

So I am awaiting the next free betas to test before I upgrade my pro version.

It's me again.



Did you change / influence other components?

sukmar

I have the same suspicion:
After a reboot the processor sways between 10-15%,
after starting Locus  (with 100%) and stopping the processor sways between 15 and 25% without doing something.

In the taskmanager there is nothing to see.

EDIT: sorry, in description in app is still 2.0.0.1, but it's already 2.0.0.2

Even I start with an empty locus-directory I have the 100 %.