Important links
- blog post (http://www.locusmap.eu/news-version-3-31-0) about major version
- list of news (http://help.locusmap.eu/announcement/version-3-31-4-6-2018) of public versions
Versions
4. 6. 2018 - Locus 3.31.0
7. 6. 2018 - Locus 3.31.0.1 - BETA
12. 6. 2018 - Locus 3.31.1
15. 6. 2018 - Locus 3.31.2
21. 6. 2018 - Locus 3.31.3
Locus 3.31.0.
Update Date Removed from Base Tab Cache?
Should not. Most probably both times are same?
Sent from my SM-G930F using Tapatalk
Not the same.
I have an old cache.
Action: Open old cache, (see update date), update, row last update disappears.
Hello,
does intent on pro works wit the same action: com.asamm.locus.ACTION_TASK ?
I have both beta and pro and the intent starts always with beta If I have only a version installed as a normal user that usually has pro or free how does it works ?
@Condor
Interesting, I did no changes here. Maybe you do not keep cache data during update? (gc settings).
@lor74cas
Good point. Try to define "package" parameter.
"menion.android.locus" for a free version and "menion.android.locus.pro" for Pro version. Should work.
Sent from my SM-G930F using Tapatalk
Screenshot before
(https://s22.postimg.cc/ueivna659/Screenshot_20180604-164317.png) (https://postimg.cc/image/ueivna659/)
And after
(https://s22.postimg.cc/myjm1j865/Screenshot_20180604-164347.png) (https://postimg.cc/image/myjm1j865/)
+edit
I figured. Tab UPDATE DATE to update no refresh! Close and new open cache. Date will appear!
(https://s22.postimg.cc/jsz0bq2j1/Screenshot_20180604-165305.png) (https://postimg.cc/image/jsz0bq2j1/)
Quote from: menion on June 04, 2018, 16:35:25
@lor74cas
Good point. Try to define "package" parameter.
"menion.android.locus" for a free version and "menion.android.locus.pro" for Pro version. Should work.
Sent from my SM-G930F using Tapatalk
menion.android.locus.pro.ACTION_TASK -> does not work
menion.android.locus.ACTION_TASK -> I cann't test I have beta and not free installed
my settings >always log offline
- i write a log
- geocaching tools > Logs Manager > blue button "arrow up" > log your visite
- locus Free and Pro stops :-[
3.31.0
I have tried it now. For me, the log via Field Note Manager has gone through OK.
missing text on crowdin ?
(https://s22.postimg.cc/gdubi8aa5/crowdin.jpg) (https://postimg.cc/image/gdubi8aa5/)
The Mini-Map in Track details could be deactivated until today :(
How to do it in V3.31???
@Condor
Ah I'm checking a source code and "last updated" is not displayed in case
a) equal 0 .. this means no update since creation, and
b) no older then one minute
Case b) cause problems to you, but it helps not to display this value for temporary points, sorry.
@lor74cas
nono keep action as "com.asamm.locus.ACTION_TASK".
I was talking about another parameter that may be defined in tasker called "Package". This parameter define, which application should handle this intent.
@balloni55
I'm sorry to hear it, but I do not have the same problem. Also OK like in case of Condor. May I ask for a log? Thanks! And text ... yes correct. The new text I made few days ago ..
@Christian
It's a big problem? Track screen on my device usually took almost 4 seconds till it open. I spend on it quite a lot of time and now, after many (mostly invisible) simplifications, we are on half. I anyway plan more radical changes, mainly merge of all tabs into one longer scrollable screen.
Sorry, hiding of map is no longer possible. If this is the serious issue for you (why?) I may consider adding it as a parameter into config.cfg file.
Quote from: menion on June 04, 2018, 22:02:27
@lor74cas
nono keep action as "com.asamm.locus.ACTION_TASK".
I was talking about another parameter that may be defined in tasker called "Package". This parameter define, which application should handle this intent.
Found it and it works now with Pro.
If you like it, I'll post the scripts (pro and free) on http://help.locusmap.eu/topic/auto-pause-while-connected-to-my-car-via-bluetooth
Inviato dal mio SM-A520F utilizzando Tapatalk
Bug found on Pro version
Tap on a track previously recorded on map
Open options and choose elevation chart.
Crash every time.
(https://uploads.tapatalk-cdn.com/20180605/f090c2a53b9a116541a13190c0eaf333.jpg)
Inviato dal mio SM-A520F utilizzando Tapatalk
Hello Developer,
found following issue: show view and map rotation on map screen don't work in latest version anymore (Locus map Pro 3.31.0).
Thx
Two tiny things:
- New settings: Icon for "Controlling" and "Points & Tracks" is identical. I think, Controlling can keep the plain cogwheel, and P&T should get the small "point bubble" or track icon overlayed
- The intent description https://github.com/asamm/locus-api/wiki/Action-tasks-(Broadcasts), track_record "stop" doesn't mention the profile name. If I remember correctly, this was added in the latest beta - it should be documented and described what it does
@Menion:
I wrote this last minute topic in 3.30 thread: http://forum.locusmap.eu/index.php?topic=6071.msg51469#msg51469
Is the intent for preset change planned anyway or should I add an idea?
http://help.locusmap.eu/announcement/version-3-31-4-6-2018:
chg: improved behavior of track edit screen (back/forward buttons)
What is new here? I tried the editor, and as far as I see, the buttons behave exactly the same. Furthermore, an old bug is still there: If several trackpoints are close together and I try to quickly "browse" through them with the buttons, inevitably after a few taps the selection gets lost. That's quite annoying, especially as it happens when points are close, so it's hard to select the last point again.
I hoped that would've been fixed, but either not completely, or something else...
QuoteMay I ask for a log?
log send at the moment ;)
QuoteAlso OK like in case of Condor
log via addon FN work also fine for me :D
@lor74cas
- publish or not publish? Not for me, but if you think other will find it useful or you just wants to discuss this feature with others, feel free to publish it ...
- show on chart: found and fixed, thanks
@helmut_hartmann
I was just looking on this yesterday. The problem was in enabled "Orientation by GPS" in sensors > compass settings. In case of show view, this will be fixed in next version. In case of map rotation, it is intent so map screen will really rotate based on this settings.
@slarti76
- same icons, I know, just need from our graphics to find some free time on it :)
- docs for intents, agree .. fixed
- intent for presets is planned, I'll add it to priority tasks to next bigger version, no need for a task on help desk in this case, thanks.
- and improved track edit screen: wrong wording. I mean page where you edit name/desc/activity for a track. There were changes how screen reacts on back/cancel actions.
@balloni55
thanks, log received. I have no idea why just to you this happen, but consider as fixed.
Quote from: balloni55 on June 05, 2018, 13:31:43
QuoteAlso OK like in case of Condor
log via addon FN work also fine for me :D
I wrote and sent through Field Note Manager (Locus). No Addon FieldNotes!
Higher data for me is not essential.
I was trying to apply the GPS correction and shift.
No change to map or save point.
I want to ask: Where does this correction apply? Only route record? Or where is it still possible to see this GPS altitude?
Quote from: menion on June 04, 2018, 22:02:27
@Christian
It's a big problem? Track screen on my device usually took almost 4 seconds till it open. I spend on it quite a lot of time and now, after many (mostly invisible) simplifications, we are on half. I anyway plan more radical changes, mainly merge of all tabs into one longer scrollable screen.
Sorry, hiding of map is no longer possible. If this is the serious issue for you (why?) I may consider adding it as a parameter into config.cfg file.
Hi menion,
It's not a big problem but is one problem more in track manager :(
Years ago you redesigned the track manager. Due to this the tiny (and imho very useless) Mini Maps appeared in the track list, The space for the text was cropped and so my long tracknames were cut. The moving text disappeared also. Very sad. Lot of wasted space for the "eye" icon.
Then the tabs in track details were introduced (not bad!) but the font sized decreased (bad for old men like me). I'm used to have all important information in one view if possible. The (redundant) Mini Map in track details is not important because it shows a bulky coloured line on a tiny map window only w/ o any further information or function: means useless and a waste of processor time, battery life and GUI space.
(Same problem in another app for weather forecast: showing the mini map permanently started a shit storm in the forum one year ago. FYI only. I was not involved.)
You should decide which mini map you want to offer to the user. But please not on all places :) At least a parameter in config file would be an option.
Please don't change the tabs to one screen! This forces users to excessive scrolling (psychologically: pseudo movement) and would not be an improvement (imho).
I noticed a better performance when track details are called because the black flickering stopped. Nice.
I would appreciate a combination of map on track and the elevation chart: tapping on the elevation chart showing the appropriate point on the track and vice versa. But may be better not in track details... only an idea.
And a kind of star rating for the tracks in track list would be nice also. My idea in help desk from years ago is gone obviosly.
Christian
Please verify. I have set the screen switch on by waving above the light sensor. Automatic shutdown for 30 seconds. When I turn on the phone with the on / off button, the shutdown is executed correctly after 30 seconds. But when I turn on the phone by waving over the sensor, the screen goes out after 10 seconds.
I confirm a problem with screen control.
Shutdown does not work!
Sensor activation - screen turns off according to Android settings.
The activation double tap - the screen lights up permanently.
Quote from: menion on June 05, 2018, 13:44:37
@slarti76
- same icons, I know, just need from our graphics to find some free time on it :)
- docs for intents, agree .. fixed
- intent for presets is planned, I'll add it to priority tasks to next bigger version, no need for a task on help desk in this case, thanks.
Great, thx!
Quote from: menion on June 05, 2018, 13:44:37- and improved track edit screen: wrong wording. I mean page where you edit name/desc/activity for a track. There were changes how screen reacts on back/cancel actions.
Ok, get it. But have to ask again: Will you have a look at the back/forward button problem in editor I described? I have a vague memory we talked about this sometime ago, but you couldn't easily reproduce it?! Is that still the case? - Because for me, I can reproduce it with 100% certainty everytime when there are points close together. It's especially easy if you have a section where you came back along the same track.
@Christian
thanks for a nice feedback. Cannot say that I have a solution for this, but I'll definitely keep this in my mind.
@Žajdlík Josef
interesting problem. Partially unsolvable, but I've at least bit improved it so timeout should be now closer to what you have defined in settings. If you do a tiny touch (movement) on your screen it will reset devices counter and will work as expected. Anyway ... improved.
@Condor
altitude correction is applied immediately when Locus Map receive a new location. Modified altitude may be seen for example in satellite screen or in the top toolbar.
@slarti76
don't know why, but I'm still unable to simulate your issue in track editor. Video record https://play.google.com/store/apps/details?id=com.hecorat.screenrecorder.free ? Thanks
@Menion
Quote from: menion on June 06, 2018, 13:30:45
@Žajdlík Josef
interesting problem. Partially unsolvable, but I've at least bit improved it so timeout should be now closer to what you have defined in settings. If you do a tiny touch (movement) on your screen it will reset devices counter and will work as expected. Anyway ... improved.
In earlier versions, the display control worked flawlessly.
It had to be same as now or something change in Android itself. I do not know, because I never used such short screen timeout and also "no touch on screen" after screen turns on.
Quote from: menion on June 06, 2018, 14:54:53
It had to be same as now or something change in Android itself. I do not know, because I never used such short screen timeout and also "no touch on screen" after screen turns on.
I do not wanna argue :)
But I used this feature mainly in a car many thousands of kilometers. I know how it worked.
About 2 years ago, I changed the timeout from 30s to 120s to see crossroad crossings after the last command.
P.S. My Android settings have been and are different for different profiles (Normal 1min, Home 5min, Work 10min, LowBat 10s, CarPower 30min, Geo 10min, and more ...)
Latest Android Update 1.2.2017
- open Tracks tab of the Data Manager
- select a track and open Track detail
- in track detail screen, select a tab other than the Information tab, e.g. Chart
- now rotate the device (e.g. from portrait to landscape)
After screen rotation the tab changed back to Information tab (instead of staying at the current tab).
Thanks Thomas, fixed.
Analysis (error from 3.31.0) of the display control:
Locus setting 120s (no change)
Android Situation setting 30s (less than Locus):
- power button - 30s (by android)
- 1 use gesture sensor - more than 10min (probably permanently or randomly, or after a random motion of the map - change of position)
- the following uses gesture sensor - 30s (by android)
- double tap - 30s (by android)
Android Situation setting 5min (more than Locus):
- power button - 5min (by android)
- 1 use gesture sensor - 5min (by android)
- next use gesture sensor - 5min (by android)
- double tap -5min (by android)
Proposal:
1. Repair or return to the state prior to 3.31.0
2. Rename the display control function.
New Name - Lights up the display
Remove the time setting. Write information - according to Android setup.
Personally I highly recommend the first option and hope that my favorite feature will work again correctly.
Thanks for a tests Condor. I'll have to install and test it with older version, because I'm still quite sure that it had to work same also before.
*** Beta version 3.31.0.1 ***
Last wishes before Monday bug-fix version possible :).
Sent from my SM-G930F using Tapatalk
Display control and permanent light.
The first time you notice the difference in settings.
I had to re-set this feature in BETA.
I noticed the difference in the settings (Pro / Beta).
Constant backlight control. This influences the control function (On / Off display). I've been looking for this setting because I have not changed it for a long time. Without my knowledge I have other settings. I do not know ... Maybe I am. But are we both (Žajdlík Josef) at the same time changed the setting? Did any update change the setting? Suspicious ...
I'm trying to test the settings of other variants again.
I expect (I hope) that this will be the case. We will see..
QuoteLast wishes before Monday bug-fix version possible :).
My wish:
http://help.locusmap.eu/topic/allow-3-26-route-planner-to-recalculate-route-with-different-profile
Display control and permanent light.
Ufff... Many options.... tests...
The result of the analysis (both Pro and Beta seems to be the same):
First issue - broken assumptions (IF) "Screen still on"
It does not matter what the assumptions (IF) are set to when the condition does not work.
I need to fix this and then continue testing.
Currently, display control "right" only works in one variant. No matter what the conditions / assumptions (IF) are. (Navigation, GPS on / off, Power on)
Only for guidance.
It does not work in any other situation.
+edit:
Night Ride Home and Test.
Combination: GPS on, navigation - the display lights up permanently. It does not even take the Android setup.
Somewhere on the disk I have an instructional video for Locus navigation. Made for Locus event school. Among other things, there is also a preview of this feature. More than 2 months old.
Quote from: erfi on June 07, 2018, 17:46:55
QuoteLast wishes before Monday bug-fix version possible :).
My wish:
http://help.locusmap.eu/topic/allow-3-26-route-planner-to-recalculate-route-with-different-profile
Yes,
I agree with the assumption that
when planning a route, it will be possible to
combine different profiles in one route.
By the way, this is not bug-fix ;-)
Quote from: menion on June 05, 2018, 13:44:37
@lor74cas
- show on chart: found and fixed, thanks
in new beta this option is no more available this is what you mean with fixed? 🤣🤣🤣
Inviato dal mio SM-A520F utilizzando Tapatalk
Quotethanks, log received. I have no idea why just to you this happen, but consider as fixed
confirm fix :) thanks
Due to the illness, only a short home test on / off the screen using a light sensor in the Beta version. It looks like if the screen is in motion, delayed shutdown works properly. Thanks @Kondor for detailed testing and @Menion for repair. After the healing, I test the bike.
Error in window when creating new folder in BETA. If I create a new folder in Point Manager when I turn the phone to portrait, the panel will be shortened when the keyboard is displayed in a narrow band and is inappropriate. When you rotate the phone to landscape, the panel is OK only in a non-keyboard view. When I click on the writing window, the keyboard completely covers the dialog box. See attached pictures.
(https://s22.postimg.cc/4vmwmv50t/Screenshot_20180608-095257_Locus_Map.jpg) (https://postimg.cc/image/4vmwmv50t/)
(https://s22.postimg.cc/hzsgzjhn1/Screenshot_20180608-100117_Locus_Map.jpg) (https://postimg.cc/image/hzsgzjhn1/)
@Condor, @Žajdlík Josef ,
I'm a little bit confused now, where is a problem. Simple steps to reproduce with the latest Beta, please.
And the problem with "add/edit folder" ... full-screen mode as usually :/.
@lor74cas
really? Maybe you have just disabled this option in settings & points > tracks > track label content?
Quote from: menion on June 08, 2018, 14:19:43
@lor74cas
really? Maybe you have just disabled this option in settings & points > tracks > track label content?
Sorry now it's ok I restored in beta a backup from pro where this setting was not stored.
Inviato dal mio SM-A520F utilizzando Tapatalk
@Menion
1) The problem will be with my English. In the post to turn on the screen with a light sensor, I wanted to say that in BETA see the problem is removed. Extinction will take place as expected in 30 seconds. Today, I tried to go outside for the walk, and the delay of the extinguishers was set. So the problem is solved for me.
2) Add / Edit dialog box. If the problem is caused by full-screen mode, would it not be possible to temporarily disable this mode when entering the menu?
CZ:
@Menion
1) Problém bude spíše s mou angličtinou. V příspěvku k zapínání obrazovky světelným senzorem jsem chtěl říct, že v BETA vezi je problém odstraněn. Zhasnutí proběhne dle očekávání za 30 vteřin. Dnes jsem udělal pokus i venku za chůze a zpoždění zhasnutí odpovívá nastavení. Takže za mně je problém vyřešen.
2) Dialogový panel Přidat/Upravit. Pokud potíže způsobuje režim celé obrazovky, nebylo by řešení tento režim při vstupu do menu dočasně vypnout?
Oki, fine, thanks. I think that Condor found out any new problem.
Really weird is that there were (at least I'm not aware of it) any changes ...
About full-screen: one more attempt in next version.
Quote from: menion on June 06, 2018, 13:30:45
@slarti76
don't know why, but I'm still unable to simulate your issue in track editor. Video record https://play.google.com/store/apps/details?id=com.hecorat.screenrecorder.free ? Thanks
Sent to locus.map@asamm.com
@Žajdlík Josef
The basic question is what time do you set up on Android? Same 30s?
After my multiple tests both Pro and Beta work the same way.
Wrong.
Everything is as I wrote higher.
@Žajdlík Josef
@Menion
Please simulate variants with my test and write the results.
The correct operation of control could only occur in one situation.
Guidance!
@ Kondor
I have 30 seconds of screen shutdown in the android and 30 seconds for Locus. The Pro version will go out after 10 seconds after the light sensor is turned on, in the Beta version for 30 seconds.
Beta
Activate the sensor.
It works in only one mode of guidance. Off after 30s (Locus).
All other situations (navigation, map, GPS off, GPS on, Power) Android settings.
@Menion
Set up, geocaching, predefined text.
The long text is missing the scroll bar.
And constant window - not adaptable.
Big problems with Fullscreen mode and various dialogs. I was not able to save changes (coloring) to an existing track, I was not able to move a track to another folder: Cancel and Save buttons to the bottom right were missing, and it was not a matter of swiping down.
Had to turn off fullscreen mode.
In Settings - Navigation - Route re-calculation, change the value of "Distance for recalculation" to something different than the default value 100m, e.g. 50m:
(https://s33.postimg.cc/rstrh1umz/Screenshot_20180610-183142.png) (https://postimg.cc/image/rstrh1umz/)
As long as Locus stays open the new value will be kept.
But as soon you restart Locus the default value of 100m is shown instead of the changed value.
Bug:
Locus Map Pro crashes when uploading filednotes.
Hi, guys
new version *** 3.31.1 *** is out.
Sorry, I did not react here, but I believe most of your reported problems should be fixed. I was not able to simulate problem with the screen on/off function based on the @Condor description, sorry.
Thanks all, hope new version will be close to "bug-free" :)
@Menion 3.31.0 Pro
So Does It Work Off Display in All Situations By Time Set Up in Locus? Really?
Serious error in PRO version 3.31.1. I would rather describe a more complex problem in Czech:
Při každém přepnutí pomocí "přednastavení" Locus v průběhu procesu zhavaroval. Po novém startu byly některé předvolby jako třeba: mapové téma a dashoboard nastaveny správně, ale jiné jako třeba: záznamový profil ne. V průběhu jízdy na kole jsem si všiml, že se obrazovka neotáčí úplně rovně po směru jízdy, ale s odklonem asi 5 stupňů jednou vpravo jindy vlevo. Zkusil jsem za jízdy přepnout v menu nastavení kompasu na automatické přepínání "telefon/GPS". Kolonka, kde bývá přednastavená hodnota (asi 6.0) km byla prázdná. Vepsal jsem do ní "6" a dal "nastavit". V té chvíli Locus okamžitě zhavaroval. Předpokládám tedy, že pád aplikace způsobuje toto nastavení ať už aplikované ručně nebo pomocí "přednastavení".
1) poslední Beta fungovala správně, proto k chybě muselo dojít až po zveřejnění poslední Bety
2) myslím, že úplně stejný problém už jsme řešili někdy loni na podzim
V této chvíli je verze PRO jen velmi obtížně použitelná. Pokud má někdo v přednastaveních různé přepínání kompasu, bude zažívat krachy aplikace.
confirmation Žajdlík Josef problem.
Required hot-fix.
+edit
Locus down when trying to change texts, numbers, values in different places.
It is a global problem.
It crashes now if I tap any of my 4 profiles.
It crashes when i change the map alignment from compass to gps or automatic.
3.31.1: Intent for preset change works perfectly! Finally I can 100% automate the start/stop of all my outdoor setups. Thx!
I also experience fcs when activating any preset from the ui in 3.31.1. Activating a preset via intend works, though...
Gesendet von meinem D5503 mit Tapatalk
FWIW, I can activate presets by intent and manually in the UI with no problems/FCs.
Crashing also when Switching settings for display activating...
Rotating the portrait to landscape display deletes the text you wrote! Log geocach.
Hmm, I hoped that new version will be without issues and seems, it's maybe worst then before.
Global problem: setup of the compass & always screen on & presets that use this settings => fixed, thanks
@Condor
"Locus down when trying to change texts, numbers, values in different places" ... where? Did not noticed any problem.
- rotation of "log a cache screen" ... I'll look at it, thanks
Crashing when open and close settings for "Display Activating" without changes
@Menion
After the update, Locus began to fall in different places. I was looking for a bug on my device. When people began to report problems, I stopped exploring and using Locus. What I remember when changing the default log, then changing the time format, Sometimes changing the% zoom. (and all places reported by other people) I try to go back to what I wanted and find out where it all fell. I suspected it was happening when typing text or values in general. So I tried randomly to enter text or value into different functions. Somewhere it went and somewhere fell.
*** Version 3.31.2 ***
Just published new Locus Map Free on Google Play. If someone uses it, please give it a try. If there won't be any more serious problems, I'll publish Pro version in the evening.
I have to change my internal system of creating bug-fix versions. It is not un-usuall that bug-fix version brings some new problems (like now), which is of course wrong ... sorry about this.
@Menion
Just remind (unimportant) details.
If there is time, throw the new text on the crowdin.
--- 3.31.2 FREE ---
Compass - OK
Rotate log text - OK
Display Control crash - ? Pro *
Display Control value - ? Pro*
Display Control working display off - ? Pro*
Pre-text log geocaching - ? Pro *
Time format (pre-log GC) -? Pro *
* 30.31.2 BETA has published as Free.
30.31.2. is not Beta. Therefore, some features can not be tested. So far, it looks like FREE 30.31.2 is OK.
Proposal to change the distribution: Would it be impossible to first publish the PRO and FREE version of the BETA version for another day until it shows that PRO is a problem? Testers would be more likely to compare whether the problems were already in BETA.
CZ:
30.31.2. není Beta. Nelze tedy vyzkoušet některé funkce. Zatím to ale vypadá, že FREE 30.31.2 je v pořádku.
Návrh na změnu distribuce: Nebylo by možné napřed zveřejnit verzi PRO a FREE nechat ještě jeden den v původní verzi v BETA, dokud dokud se neukáže, že je PRO bez problémů? Testeři by tak mohli snadněji porovnat, zda se problémy vyskytovaly už v BETA.
Would be nice if we could download older apk's to revert back.
--- 3.31.2 PRO ---
Compass - OK
Rotate log text - OK
Display Control - OK
Display Control value - OK
Display Control working display off - IS NOT WORKING (only when guidance)
+edit new finding:
The display also goes out according to the Lokus setting even when you are alerting the POI. It does not matter the settings. (Control Display)
Pre-text log geocaching - OK
Time format (pre-log GC) - CRASH
(https://s22.postimg.cc/onw1zrfbx/Screenshot_20180615-234220.png) (https://postimg.cc/image/onw1zrfbx/)
Big problem!
Route planner can not change the profile.
chg: improved style of circular clickable buttons above map (route planner, track editor, etc.) ???
@condor: You are right. I tested with sgs8.
Display is ok: confirmed. :)
New Bug - Route planner change profile: confirmed :(
Route Planner profile button: for me is initially enabled, then after adding first route point the button is disabled/ grey.
Changing presets is working again.
3.31.2
Data / routes / three dots next to track name / edit = application crash
Hi,
Before it was possible in Route planner to change Drawing mode while planning the route.
But now I cant change it. MTB to walk or manual especially.
There is situations where you need to change drawing mode, but now it is not allowed?
Here is speechless video about what I mean:
https://drive.google.com/file/d/1g_-iig9JgChRhbbFDIXVMoghL5DkEQDu/view?usp=sharing (https://drive.google.com/file/d/1g_-iig9JgChRhbbFDIXVMoghL5DkEQDu/view?usp=sharing)
Action:
Start add FieldNotes, Tap to get Pro, (Shop Locus)
No return - Endless cycle.
About 10th tap worked.
Repeated simulation path directly to the store OK.
I can not infer the cause and the result.
Hi,
issue with route planner ( http://help.locusmap.eu/topic/you-can-not-select-the-drawing-mode-in-the-route-planner#comment-58800 ) will be fixed in next version.
@Žajdlík Josef
usually I need a log, but in this case, I probably see the reason of this issue ... next version.
@Condor
have to try it more carefully tomorrow (issue with screen on/off, weird). Problem with Store is known to me, just not yet fixed ..
Auto screen turn-offQuote from: menion on June 07, 2018, 16:47:11
Thanks for a tests Condor. I'll have to install and test it with older version, because I'm still quite sure that it had to work same also before.
From the Locus tutorial I quote:
Auto screen turn-off
setting of the interval before turning the screen off again
is set in 5 second steps from 0 to 120 seconds. 0 = screen turning off is disabled (until the system turns the screen off)
Always screen on
The option overrides system screen on/off setting but does not influence the settings made by the Screen on/off control feature
Locus Map prevents the phone screen from turning off:
Always - permanent screen on
When GPS is on - screen stays on when the GPS is on
During guidance/navigation - screen stays on when user is navigated or guided to a point or along a track
When charged - screen stays on only during charging the phone
This function has worked for years as well.
At the moment, it does not work right or not at all.
P.S.
If you do not believe me, then follow the instructions for Locus 8)
3.31.2 Bug with Geocaching Tools display.
Geocaching Tools
Cache Radius Limit
Select a list
(Used to turn the list color orange when you return to this function later to turn it off)
Now it shows as the screen shot below.
(https://s22.postimg.cc/keomd2af1/Screenshot_20180617-152147_Locus_Map.jpg) (https://postimg.cc/image/keomd2af1/)
Yes,
Where are the markup boxes?
Bad news.
If that's the intention. (I hope not)
Then it is a step back.
This option will be missing and will add up to a few more dozens of clicks (unnecessary) in Locus for more.
Quote from: 0709 on June 18, 2018, 07:21:59
Screen on/off at Navigation.
Info: Screen on_off at Navigation I did not see a change ! Functional as usual.
Always screen on (= screen on/off control by Locus) and Android screen time out set: 30 min.
Screen Off/On by Power button: Screen off after 15 sec ( Locus setting)
Screen Off/on by Gesture proximity: Screen on continuous, until (by new wave) screen off: (Locus setting by config.cfg)
# Disable "Turn off if idle" when screen was turn on by gesture (default: false)
turn_on_screen_by_gesture_disable_auto_screen_off=1
Screen Off/on by Navigation (POI) alerts: Screen off after 15 sec. (Locus setting)
To Do (try). Remove the Locus admin rights for screen off control in Android.
Restart phone > Locus > Use (a) Locus screen on/off action. Ex. By (gesture).
Locus asks for the admin rights. Allow. Does not help ?
I do not use always on display I just use the bypass of lock screen.
Yesterday I was looking for some track and phone was on charge, I stopped using the phone and the display went off but when the phone reached the 100% of charge the charge notification unlocked the phone displaying the locus map.
I told you this case if could be useful to find the bug.
Inviato dal mio SM-A520F utilizzando Tapatalk
0709
I have restarted the permissions on Android. Of course, according to my assumption it has no effect.
I've done a lot of tests of different setup options. I write about them in previous posts.
OK.
Control question:
Does display control work for example when navigating without POI alerts?
0709
Thanks.
HTC One M9, Android 7.0
Not work.
I will add that, for example, this function is working correctly when guided.
I also suspect Locus.
@JohnCNA
thanks, then issue will be fixed in next version
Problem with the screen on/off & whatever ... anyone has the same problem as @Condor? Probably not. Condor, may you send me on email backup of your settings with a few simple steps I should do (after import of your settings) to get the same issue like you have? Thanks.
0709
Thanks for the question. Your deduction is correct. I know about the functionality and the differences of the internal and external installation. :)
Quote from: menion on June 17, 2018, 01:18:42
Hi,
issue with route planner ( http://help.locusmap.eu/topic/you-can-not-select-the-drawing-mode-in-the-route-planner#comment-58800 ) will be fixed in next version.
Does that also affect the navigation mode? What I did:
- Select a point, choose Navigate To
- Do all the settings and start the navigation
- Route is calculated, but I don't like it
- I open the navigation quick settings (or whatever that dialog is called), long-press on Recalculate, choose another profile - nothing happens. Ok, extra (short) tap on Recalculate - nothing happens. Can't get the route to be recalculated...
Hmm are you sure that result of re-calculation should be different? Just for sure...
Mode of manual recalculation = point priority?
Sent from my SM-G930F using Tapatalk
My navigation never counted the route after changing the profile. I know about it and I handle it manually. I do this automatically off the navigation, edit profile and navigate again.
This too is a long list of my proposals with a low priority.
Quote from: menion on June 18, 2018, 23:25:08
Hmm are you sure that result of re-calculation should be different? Just for sure...
Mode of manual recalculation = point priority?
Doesn't need to be different, but obviously nothing happened, because no "Working..." pop-up appeared. And it's a long route which (on that old phone) takes a few seconds to calculate, so it's not possible that suddenly it's there without delay.
Just for information: Should it already recalculate after I chose a different profile or only on additional click?
Edit: And yeah, point-priority
3.31.2 Pro. This bug report is probably same as slarti76...
route planner > add first point > add second point > tap Navigation icon but dialog won't open ;-(
I can tap Navigation icon & open dialog before and after adding first point, but not after second point.
I never thought to start navigating from the planned route.
But I read here and so I tried what it does. There is a "chaotic behavior". Navigation is running and "My Location" is the center of the map. When moving maps (manually), the navigation attempts to count a new route, reports turns, pips points ... Simply chaos.
So it works? I have not understood the intent and importance of this behavior.
@slarti
hmm click is necessary after you select the new profile. Anyway, I have on help desk one guy with an exactly same problem and I'm unfortunately still unable to simulate this issue. Are you for example able to simulate it on the exactly same place again and again?
@Andrew Heard
this issue will be fixed in next version, sorry
@Condor
you most probably have disabled GPS in Locus right? Then mp center behave like some kind of simulation.
Upss ... You're right! After the previous tests, I left the satellite icon white! I never changed it so I did not notice it. Sorry.
But OK at least I discovered a hidden new simulation feature: D
By the way, I just watch Jürgen Gärtner's dream come true. Ok so my tests of three other navigators were useless. Locus will now behave differently as a standard. I do not mind doing this and I do not use it. Only in the morning in hotels can anyone not notice this change of calculation. And it will be surprising that the target is 300km and not 25. But OK.
Hmm why you have disabled GPS, hard to say.
Anyway behavior: simulation when GPS is turned off, is in Locus probably since begin. Agree it may be confusing when not known ...
@Menion
I will tell you exactly how "I off" the GPS.
Standard GPS status on (orange). Action - simulation on - simulation off. And I expect that GPS will return to the previous state or GPS on orange. And not to return to a state I've never won - GPS off white.
@slarti76 , may you please try this version and create a log right after you tap on "recalculate" and nothing happens? In logs should be some more information.
Version: https://drive.google.com/file/d/1pTiUDcHy5GFvvGycCpvkiTy6slySXmxM/view?usp=sharing
Also, this new version is made mainly because of Huawei troubles ( http://help.locusmap.eu/topic/locus-pro-on-huawei-smartphones ), anyway it should also contain fixed problems reported here and on help desk.
Apologies if already mentioned/ fixed. 3.31.2 Pro: track list > folder > tap vertical dot-dot-dot > Edit > crash.
Not a problem/ just curious but I also note a slightly different folder sort order. Previously a folder beginning with a hyphen character "-" sorted to top of the list/ group, but now gets sorted to the bottom of the list. I was attempting to rename this folder but not currently possible due to reported crash.
Hello Andrew, not sure for 100% if this is already fixed, but I believe it is. I'm thinking about last bug-fix version today, so ...
*** Version 3.31.3 ***
bug-fix version with minor changes and fixes. Thanks for reports!
3.31.3 Pro:
fix for crash when edit of track folder OK.
fix for disabled Navigation icon in Route Planner OK.
Quote from: Žajdlík Josef on June 16, 2018, 07:54:52
3.31.2
Data / routes / three dots next to track name / edit = application crash
The error is fixed in the latest version of Locus. Thank you
I can not download the offline elevation data from this Coordinates
N 44°49.571' , E 014°44.717'
But you can be proud for how locus is working, it simplifies my holidays
(https://uploads.tapatalk-cdn.com/20180626/e99edaef008ea57b5bbe7aaf60127301.jpg)
Inviato dal mio SM-A520F utilizzando Tapatalk
Quote from: lor74cas on June 26, 2018, 09:07:40
I can not download the offline elevation data from this Coordinates
N 44°49.571' , E 014°44.717'
We prepared custom version to try to fix it: https://drive.google.com/file/d/1vM4u36lyNbB6pelxgzIxqFeiEyPWHXRa/view?usp=sharing
Please install it and try to download data again.
Thank you
Quote from: voldapet on June 26, 2018, 10:15:56
Quote from: lor74cas on June 26, 2018, 09:07:40
I can not download the offline elevation data from this Coordinates
N 44°49.571' , E 014°44.717'
We prepared custom version to try to fix it: https://drive.google.com/file/d/1vM4u36lyNbB6pelxgzIxqFeiEyPWHXRa/view?usp=sharing
Please install it and try to download data again.
Thank you
No way to download the elevation data with the new beta.
(https://uploads.tapatalk-cdn.com/20180626/b511535e3abf5079a3508aff31c0bc75.jpg)
Inviato dal mio SM-A520F utilizzando Tapatalk
Hi,
today I tried (the first time since a long time) the new geocaching functions,
And yes ;) ... there are a lot of improvements. 8)
But ... I have some questions/problems:
- How can I check the state, sequence of my found caches
Some of them I logged direct online (because of using an standard text ...) , some I just wanted do save within Locus and edit/upload them later direct, some I wanted to upload as a fieldnote to edit them on the webpage (because this was an Earthcache and I first want to write a mail and then log the cache.)
I use the shifting functions after found to a seperate folder, but there is no sort criteria " Found Date"; and I can't see the state of the cache (just only saved, uploaded as direct log, uploaded as field note)
- Upload an image to a fieldnote
When a cache was uploaded as a fieldnote, how can I upload the taken image of this cache?
- State of the note
I always use the note to save my notes ;) persistent on gc.com ...
How can I see wether the note is just saved or uploaded?
Track on the Map
Click on it. Save copy
Folder for points is open. Can't Switch tracks
@lor74cas
aaaa Italian translation is incorrect: https://crowdin.com/translate/menion/3292/en-it#6647013. There should be %s and not %d. What a stupid bug. Temporary solution: change language of Locus to other then Italian.
@johny.blue
you have perfect logical questions, unfortunately, all are little complicated to solve, sorry.
state of cache log should be a little problem. Probably best is to check Menu > More > GC Tools > Logs manager. Here on left side of every item will be a green strip in case, log was already uploaded to gc.com or exported to fileAnotherldNote). Another option is currently not possible as I think about it.
Upload image for uploaded field note: sorry, Groundspeak does not support it. If you have a log with images, use rather a direct log or export to offline text file. In the second case, images will be exported as well.
State of note is another not yet perfectly solved the problem due to missing functions in Geocaching API, sorry.
@skwal
thanks, will be fixed
@johny.blue
Sort the Found folder according to the latest update.
You'll have a cache in the order you found them.
Beware - in case of subsequent editing, the cache moves up! (or at the end).
Quote from: menion on June 27, 2018, 13:53:14
@lor74cas
aaaa Italian translation is incorrect: https://crowdin.com/translate/menion/3292/en-it#6647013. There should be %s and not %d. What a stupid bug. Temporary solution: change language of Locus to other then Italian.
@johny.blue
you have perfect logical questions, unfortunately, all are little complicated to solve, sorry.
state of cache log should be a little problem. Probably best is to check Menu > More > GC Tools > Logs manager. Here on left side of every item will be a green strip in case, log was already uploaded to gc.com or exported to fileAnotherldNote). Another option is currently not possible as I think about it.
Upload image for uploaded field note: sorry, Groundspeak does not support it. If you have a log with images, use rather a direct log or export to offline text file. In the second case, images will be exported as well.
State of note is another not yet perfectly solved the problem due to missing functions in Geocaching API, sorry.
@skwal
thanks, will be fixed
Language changed altitude data downloaded
Inviato dal mio SM-A520F utilizzando Tapatalk
QuoteUpload image for uploaded field note: sorry, Groundspeak does not support it. If you have a log with images, use rather a direct log or export to offline text file. In the second case, images will be exported as well.
Hi Menion,
I currently use CacheSense and there is this functionality supported. (Unfortunately the app isn't developed furthermore since some years :'( ... but with the increasing developement of Locus geocaching functions I see a chance to switch to a new caching system ;) :D)
Because the developer of Cachesense only uses the API (and provides uploading of images to a cache log and even to a trackable log) I think the API provides theses methods.
I saw in a recent post of you the different methods of the API ... and as far as I remember my old programming skills ::) ... I think these two methods look like that what we're looking for.
(https://s15.postimg.cc/gv55s6h2v/API.jpg) (https://postimg.cc/image/gv55s6h2v/)
When uploading a fieldnote (not a finally log) within cachesense I then have to reload the cache logs (I think with this step the GlobalID of the log is then returned ... and this is necessary in the method to identify the log for which the image should be uploaded)
BTW, uploading an image to a trackable log would solve my question in help desk ... :)
QuoteState of note is another not yet perfectly solved the problem due to missing functions in Geocaching API, sorry.
What I ment with this question was only transparency whithin Locus ... because within the note dialog you can choose "upload" or "save".
This is a very useful choice but I can't see that I "forgot" to upload the note when I solved/finished all entries to a cache.
... and when I leave the cache zone and delete the cache within Locus ... the note is gone. :'(
QuoteSort the Found folder according to the latest update.
You'll have a cache in the order you found them.
Beware - in case of subsequent editing, the cache moves up! (or at the end).
Thanks 8)... I really overlooked this option because there is a submenu "geocaching" and I thought there are my missing sort options.
BTW, these different menus makes the handling not so easy and intuitive.
I found these problem also within the detail page of a point:
- in the share menu (lower part) you can do a lot of geocaching functions ( and only the last point affect sharing a point)
- in the lower part there is a geocaching icon where you can log caches
- in the upper right corner you have a cache icon ... and there are the next/duplicate caching options/functions
What icon should I use for logging?
I have activated the add on for geocaching ... is this the reason for these 2 buttons. I didn't figure it out (till now ;))
When I copy a track (you know, the functionality where you can reverse the track direction), it offers to choose POI folders instead of track folders.
*** BETA 3.31.3.2 ***
- completely changed system of login to Locus Store (& live tracking). Now it's is not anymore needed "Contacts" permission (that many user worry about)! I really expect problems here, so do not hesitate to report any bugs.
- a completely changed system of small toasts (forced to do it from Google itself), so expect problems here as well ...
@johny.blue
this is a really long post that I'll need to read more than once :).
Anyway, the missing ID of an uploaded draft was the reason, why I did not add support for upload of images in this case. I'll check what is possible to do with the hint from you, thanks.
For your info, Groundspeak published completely new API for developers that needs to be implemented till 05/2019. I do not know what has changed there so ...
Mess in point screen
hmm ...
- button under "Share" button are in almost all cases from add-ons and Locus itself do not know what these functions do, so they are all here ...
- buttons in bottom left are quick functions defined in settings > geocaching
but agree that it is a mess :/
@tapio
should be solved in new Beta!
With the LT started the bottom right red stop button stops LT but remains a red stop button and do not change into the green start icon.(https://uploads.tapatalk-cdn.com/20180630/22cb05b258edf8fa7044b3027c224b47.jpg)
Inviato dal mio SM-A520F utilizzando Tapatalk
Thanks, you are correct. I've reported this to colleague Milan (he's on vacation now).
QuoteI'll check what is possible to do with the hint from you, thanks.
The exact way/workflow within cachesense of uploading an image to a log is:
- you press the 'image-upload-button'
- all logs from this cache are read
+ all logs: found, not found, note ....
+ all TB logs: visited, dropped ...
+ these different logs are read online and offered in a box and you can choose to what log you want to upload your image.
Maybe this helps .... 🙄
LT activated associated to public room but no chat icon present on map.
I think every feature has it's place in the settings LT not, just the icon in more function panel.
The number of feature is every day bigger and so the settings. But it's every day harder to find the set up you need. It's time to think a new way to find what we are looking for. What about introducing a new feature to rule them all? A search field to find the key word of the settings.
For example searching for "track" can find
Points and tracks
Tracks
Track recording
Live tracking
...
One touch and we are there.
Something like our little Google inside Locus.
Inviato dal mio SM-A520F utilizzando Tapatalk
Live Tracking.
After a few km, the location LT icon beneath the navigation cursor began to bother me. This icon may be hidden. There is too much in one place. On the cushion there is the cursor, arrow, cache, LT icon. You can not even click the cache.
POI notif Live map - G4L
There has been some change to the POI alert.
Live map point notifications can not be stopped. About every map update it takes the original point again as new.
In this state unusable.
Hi guys,
two days spend on problems with app install & license over Google Play and the problem with Geocaching Live API on 4.x devices, nice. Both issues out of Locus Map.
I will today publish new Beta version 3.34.3.5 and tomorrow, please excuse me on 12 days (hike in Albania). Not sure, how much I'll have access to the internet, we will see ...
If you will have usage for Locus Map during these days, please use this Beta. Completely new system for login into Locus Store, completely new small "toasts" system (that will hopefully satisfy Google requirements), test support for WMTS maps (temporary caching like for WMS maps only), new main Live tracking screen and some smaller changes ... testing is definitely needed :).
Have a nice summertime!
Btw. I'm leaving tomorrow after launch, so if in Beta will be any serious problem, I'll be still able to create new version in the morning.
@lor74cas
quite a big idea to be true ...
@Condor
visible "own icon" on the map is because of "Show my last send location" settings in Live tracking profile.
Problem with POI Alert .. I've improved it little bit, so next version.
Quote.... please excuse me on 12 days (hike in Albania) ...
I wish you a nice holiday :)... and a good rest. ;)
Can anyone try Betu on Android 4.2? He can not run on my phone.
Quote from: Žajdlík Josef on July 05, 2018, 20:19:56
Can anyone try Betu on Android 4.2? He can not run on my phone.
From the release notes: no more support for 4.0.3 and 4.0.4
No more support for Geocaching since 4.4.0
I 4.2 is in the middle I can not help you I have only devices from 6 to 8 now.(https://uploads.tapatalk-cdn.com/20180705/f4efa114ec4570bb5585bb52f5b74294.jpg)
Inviato dal mio SM-A520F utilizzando Tapatalk
As you can read here (https://play.google.com/store/apps/details?id=com.arcao.geocaching4locus) the addon geocaching4locus ver. 2.2.5 has to drop support for devices running Android 4.3 or lower.
Maybe this is true for the newest Locus beta too.
At night I try BETA on my son mobile 4.2
Edit:
Sorry my son has Android 4.1.2 and beta works OK
Would it be possible to adjust the display so that the icon overlaps the compass arrow?
(https://s15.postimg.cc/f1j54lvev/Screenshot_20180714-124447_Locus_Map.jpg) (https://postimg.cc/image/f1j54lvev/)
mini "preview map" inside Beta is zoomed in too much , so user get no overview
(https://s33.postimg.cc/wd9kc798b/mini.jpg) (https://postimg.cc/image/wd9kc798b/)
have you done some changes related on this topic?
http://help.locusmap.eu/topic/wp-icon-sometimes-not-displayed-on-mini-map-preview
but there i can´t see any improvement
Hi all,
@Žajdlík Josef
I think I have found a solution for "geocaching live" in Locus for Android 4.2. I'll publish new Beta version soon, so if you may try this version and confirm that login work, it will be perfect. Did you have any other problem with Beta version on Android 4.2?
@balloni55
yes, it was caused by this. I spend on this problem some time and I'm still unable to find out why this happens, all looks correct. Thanks for the report of this new issue ... fixed.
@menion
Please take a look
http://forum.locusmap.eu/index.php?topic=6231.msg52017.msg#52017
And I do not remember how to share a Dashboard Profile
or there is no way?
Inviato dal mio SM-A520F utilizzando Tapatalk
Quote from: menion on July 17, 2018, 16:01:21
@Žajdlík Josef
Did you have any other problem with Beta version on Android 4.2?
Hi Menione, I hope you've been on holiday for a while.
Beta is not going to run Alcatel with A4.2 at all. I attach SCR. The PRO version works normally. But if you are preparing a new version, we will not do it. Perhaps the installation was wrong. We'll see what happens after the update.
CZ: Ahoj Menione, doufám, že jsi si na dovolené odpočinul.
Beta nejde na Alcatel s A4.2 vůbec spustit. Přikládám SCR. Verze PRO funguje normálně. Pokud ale připravuješ novou verzi, tak to neřešme. Možná jen proběhla špatně instalace. Uvidíme, co se stane po aktualzaci.
(https://s15.postimg.cc/m6yzuqqk7/Screenshot_2018-07-17-19-26-30.jpg) (https://postimg.cc/image/m6yzuqqk7/)
Hello menion
a year ago it was possible to "sync" notes of geocaches if user run "update geocache"
http://forum.locusmap.eu/index.php?topic=5642.msg47391#msg47391
currently it works only one direction GS>Locus if user run "update geocache" and not vice versa :-[
Hello menion & others
now i need your advice and help, how to handle "offline logged" geocaches with Beta or PRO
My situation:
- in my inventary i hold a TB
- this morning while geocaching i found 7 caches
- into the 8. found cache i droped the TB
- i continued with additional 11 found cache
all offline logs are visible inside locus "Logs manager"
How can i "log online" all these caches and the TB at once ??
My target:
- TB should be logged as "visited" in cache 1-7
- TB schould be dropped in cache 8
Hi balloni,
There really was some kind of "sync" mechanism? Sis not know it :/. And something has changed? Locus itself never published your notes during any update or other feature except direct tap on "uplod" button in edit notes dialog.
About trackables ... shortly: what was your progress in previous versions? ... and also in latest public Pro which works same as old versions.
Sent from my SM-G930F using Tapatalk
QuoteLocus itself never published your notes during any update or other feature except direct tap on "uplod" button in edit notes dialog.
sorry, you are right, i didn´t read my own post correct :o
from locus to GS is only single upload possible
About trackables:
to be true, i´ve never logged "visited" for a TB since yet ;)
you and Condor discussed in the past a lot about this and i can´t follow at all ::)
so today i´ve wanted to test it with Beta and i failed
e.g.
- if i mark only my first 7 Cache logs, click the "blue round button" > Log trackables to set them on "Visited" all my cache logs inside locus logs manager are marked ?!
so i didn´t continue and ask how it should work....
Quote from: lor74cas on July 17, 2018, 18:22:33
@menion
Please take a look
http://forum.locusmap.eu/index.php?topic=6231.msg52017.msg#52017
And I do not remember how to share a Dashboard Profile or there is no way?
Inviato dal mio SM-A520F utilizzando Tapatalk
Found the way to share the custom dashboard but unable to hide the red arrows of trackpoints on the chart.
Someone suggested the function to edit the details of trackpoints:
http://help.locusmap.eu/topic/labeling-of-navigation-points
I agree but we also need something to hide normal trackpoint and show special points on chart.
My idea is to show the road book as we can have at a bike or running race creating it from the gpx of the race.
If the gpx contains the special points The chart can show them otherwise we can add them editing the points on track as special.
(https://uploads.tapatalk-cdn.com/20180719/8ef3b6fc355237f752fc856c4767d6d0.jpg)
Inviato dal mio SM-A520F utilizzando Tapatalk
@balloni55
ÿou wrote: "i mark only my first 7 Cache logs, click the "blue round button" > Log trackables to set them on "Visited" all my cache logs inside locus logs manager are marked ?!" ... sorry, do not understand.
When you select some field notes and tap on "Log trackables", Locus should then load your inventory and display it. Here you may select trackables that "visited" selected caches ... this does not happen?
@lor74cas
I gave you an answer in original topic, hope it helps.
QuoteWhen you select some field notes and tap on "Log trackables", Locus should then load your inventory and display it. Here you may select trackables that "visited" selected caches ...
exactly this happen
if i now click cancel, i see that
all offline logged field notes are selected
For now i cant take a screencast because in meantime i´ve all logged online without visited log
Ah understand. So after press "cancel" in dialog with trackables, you lost your previous selection of logs. Fixed, thanks.
And about workflow: till some offline log of trackables will be supported, only semi-automatic option is
- select first X caches > log visited for your trackables
- drop manully single trackable
- select remaining X caches > log visited for your remaining trackables
thanks for solving this :)
so next time workflow for offline logged caches "how to log online" is clear ;)
I use Locus Pro since years - and I love it, as well as the constant software-development and support; but now, since the last update I do have again and again the following problems when GPS is activated:
either
1. Locus crashes totaly
2. or GPS position stops
3. or when recording a track - recording stops
It leaves me really desperate, especially now in summertime when I use Locus every day on my tours!
What to do?
Is there any bug?
Thank you very, very much for your help!
(device: S5neo with marshmallow 6.0.1)
Sorry to hear about such troubles. Maybe it all comes from the first mentioned problem.
To solve this, usually best is to create a log right after crash happen, by this method (http://docs.locusmap.eu/doku.php?id=manual:faq:how_to_create_debug_log). Thanks
Well, I hope I can get this log when Locus crashes again... (maybe others have the same problem at the moment).
This problem, which is written by Bezel, is on Redmi Note 4.
Quote from: menion on July 20, 2018, 12:49:33
Sorry to hear about such troubles. Maybe it all comes from the first mentioned problem.
To solve this, usually best is to create a log right after crash happen, by this method (http://docs.locusmap.eu/doku.php?id=manual:faq:how_to_create_debug_log). Thanks
It crashes again and again.....
(https://s22.postimg.cc/4tznei2lp/locus_screenshot_-_recording_crash.jpg) (https://postimg.cc/image/4tznei2lp/)
I tried to create an bugreport - I hope it helps (I have send you the report by PM).
It seems that a lot of people do have this problem at the moment...
Best wishes
@bezel: Is your device by chance a product of the really great manufacturer Huawei or Honor running Android 8?
... no, Samsung S5 neo w. marshmallow 6.0.1
.... in this case this (http://docs.locusmap.eu/doku.php?id=manual:faq:gps_lost_fix_android6) might help.
I'm worried, this will be something different.
In case, the app really crashes ( so you see a dialog with "Locus Map was terminated" or similar), this definitely has to be some serious problem in the app itself.
Thanks for a log @bezel. You send it correctly, but unfortunately, I see no useful information in the log :(. Your device print to log so many messages, that there are only 4 minutes. Firstly, do you see such "crash" dialog I mentioned before? If so, may you please try it once more and as quickly after app crash as possible? Thanks!
Dear menion,
GPS crashed yesterday again several times. It was only one time possible to "create" the log (the one I have send to you).
I do not know what I am doing wrong (I took the instructions from here: http://docs.locusmap.eu/doku.php?id=manual:faq:how_to_create_debug_log (http://docs.locusmap.eu/doku.php?id=manual:faq:how_to_create_debug_log)) - before I open Locus, I "Enable USB debugging" (developer options) + select "Take Bug report".
Just one time it showed me the report in the notification bar.
Greetings!
(btw: for sure I do not have activated the "Energy Option" of the mobile )
The new Beta is still down on Android 4.2. It would be advisable to check on multiple devices before releasing the Pro version.
Cz: Nová Beta na Android 4.2 je stále nefunkční. Bylo by vhodné to prověřit na více zařízení před vydáním verze Pro.
The new beta has a new icon for geotour, but text when long pressing the icon is still wrong. And the geocache description still does not show the geotour icon when it should. And filtering on geotour attributes still does not work.
Sent fra min Power 3S via Tapatalk
#133
Quotemini "preview map" inside Beta is zoomed in too much
solved thanks, but not the other linked topic in this post
with last and current BETA download of routing data for BRouter didn´t start after click on "download arrow"
(https://s33.postimg.cc/6ss7pyjq3/Screenshot_20180723-210415.png) (https://postimg.cc/image/6ss7pyjq3/)
Hi balloni55,
could it be that only the rd5 file of that area is missing in the segments4 folder of brouter?
Forget it. I did not read your post in-depth enough.
c.s.g.
@bezel
you did everything correctly. It sometimes happens, that you are not fast enough and in log (which print only last few minutes) is not the visible error itself. Or sometimes happens that error isn't there at all., Anyway may you please give it a second try? Thank you!
@Žajdlík Josef
app tested also on my SGS2 with Android 4.1.2 and no problem. If app crash, best is to create a log!
@locus.sv@heime.org
name of icon fixed, thanks. Anyway as I see, there should be no problems with filtering. Maybe try to re-import your cache and re-set a filter. If still not work, please send me GPX file with a cache for test, thanks.
@balloni55
sure, linked topic is not solved as you may see on the help desk. I do not know how to solve it now (can't find a reason why this happen), sorry.
Click on "download" button does not work on your Android 6.x? Hmmm, have to try it, thanks.
QuoteClick on "download" button does not work on your Android 6.x? Hmmm, have to try it, thanks
with PRO on same device it work well
It is possible. I was forced by Google to completely remove old system used for these colored popup "toasts" and use some more official method that is not so flexible. It is possible that on some devices, it won't be possible to click on it :/.
QuoteIt is possible that on some devices, it won't be possible to click on it :/.
identically behavior on my old SGS2 CM14 7.1
Quote from: menion on July 24, 2018, 13:00:40
@Žajdlík Josef
app tested also on my SGS2 with Android 4.1.2 and no problem. If app crash, best is to create a log!
https://drive.google.com/open?id=0B2JefmdshiwpaUxZaExseXhZOEE
Thanks Josef, I think I've got it.
In the new Beta 3.31.3.8, the startup problem on A4.2 is removed. Thank you.
And filtering on geotour attributes seems to work now :-)
Perfect, glad to hear it.
We just today published on Google for the limited number of first users, version Locus Map Free 3.32.0 RC. Because there were bigger changes with login into Locus Store and some other modifications, I need to test them more before publishing Pro version. So just no worry, Pro version will be out at the start of next week :).
And enjoy weekend. At least in Czech, way too hot ... uff
I found myself trapped in the Store again with the latest RC. Both the system Back button (bottom left) and the Locus one (top left) took me to the same screen I was already on. Eventually rapid and repeated tapping on Back while the screen was reloading allowed me to escape.
(https://s8.postimg.cc/5rs0zhd6p/Screenshot_2018-07-28-09-15-04.png) (https://postimg.cc/image/5rs0zhd6p/)
Quote from: john_percy on July 28, 2018, 10:51:57
I found myself trapped in the Store again with the latest RC. Both the system Back button (bottom left) and the Locus one (top left) took me to the same screen I was already on. Eventually rapid and repeated tapping on Back while the screen was reloading allowed me to escape.
(https://s8.postimg.cc/5rs0zhd6p/Screenshot_2018-07-28-09-15-04.png) (https://postimg.cc/image/5rs0zhd6p/)
For me up left back button on screen and back phone button work correctly
Inviato dal mio SM-A520F utilizzando Tapatalk
Steps to reproduce:
- Store
- Change account (or fresh install or new beta)
- Tap on map for sale
- Tap on Log in
- Attempt to login by Facebook. Authentication failed.
- Log in via Google
Success, returns to store page as illustrated.
-Attempt to exit
Sent from my XT1039 using Tapatalk
Quote from: john_percy on July 28, 2018, 11:41:44
Steps to reproduce:
- Store
- Change account (or fresh install or new beta)
- Tap on map for sale
- Tap on Log in
- Attempt to login by Facebook. Authentication failed.
- Log in via Google
Success, returns to store page as illustrated.
-Attempt to exit
Sent from my XT1039 using Tapatalk
Of course normal case of use 🤣
You are a bug hunter like Indiana Jones is a archaeologist
Inviato dal mio SM-A520F utilizzando Tapatalk
This problem is not so unusual. It happens to me personally maybe twice already.
Unfortunately, nice exact steps do not lead to the same issue on my device. Will try it next week on colleague Milan's device, who just a few days ago told me that same issue happen to him as well. Thanks
Quote from: menion on July 28, 2018, 13:47:43
This problem is not so unusual. It happens to me personally maybe twice already.
Unfortunately, nice exact steps do not lead to the same issue on my device. Will try it next week on colleague Milan's device, who just a few days ago told me that same issue happen to him as well. Thanks
On the face of it, it looks like the Back button is going back to the logon success screen which then redirects to the page I was at before I logged on, which is the map description page in the store.
Sent from my XT1039 using Tapatalk
Hmm weird, three devices and no one has same problem.
Later, I'm sure I'll simulate it and fix. Till now, use special multi-back press :).
Btw. the new version is out. Hope that everyone finds there something useful, enjoy it and thanks for the perfect help as every month ;).